HM2140
HM2140 Ultralow Power UltraSense™ FHD CIS
89.5mW @30FPS(MIPI) 1/4″ 1920 x 1080 (FHD) Color CIS MIPI CSI-2/Parallel
HM2140 is an ultralow power 1/4” 1080p CMOS Image Sensor (CIS) which uses Himax Imaging UltraSenseTM Back Side Illuminated (BSI) 2µmx2µm pixel technology designed for IOT, a wide range of battery power based video camera such as home camera, battery door bell, action camera and consumer surveillance applications.
The binning sum mode not only increases the pixel sensitivity but also reduces more sensor’s power than normal FHD mode in same frame rate condition.
For fast boot-up applications, HM2140 can shorten the I2C programming time with partial register settings from Shut-down mode to normal mode.
影象传感器特色
- UltraSense™ Back Side Illuminated (BSI) pixel delivers outstanding sensitivity, response uniformity and noise performance.
- Designed for low power consumption at 30 frames per second (FPS)
- Operates up to 30FPS at full resolution and up to 60FPS in sub-sample over MIPI interface and Parallel interface.
- Global analog gain up to 15.5x
- Supports RAW10 format
- Precision black level calibration independent of operation temperature, gain and voltage
- On-chip temperature sensor
- Support SSCG on MIPI DPHY
- Available in CSP package
- Support 3D SYNC for image synchronization
- Integrated LDO, POR and PLL
影象传感器规格
Part Number | HM2140-AWA |
Color Filter Array | Bayer |
Array Diagonal | 4.42mm |
Resolution | FHD (1920 x 1080) |
Output Format | RAW10 |
Optical Format | 1/4″ |
Pixel Size | 2µm x 2µm (UltraSense™ Back Side Illuminated) |
Frame Ratemax | 30FPS |
Sensitivity (FD @ 530nm) | 1650mV / Lux – sec |
Video Data Interface | 1-lane MIPI CSI-2 10-bit Parallel |
SNRmax | 36.7dB |
CRAmax | 18° |
AVDD / DVDD / IOVDD | 3.3V / 1.2V (1.8V LDO enabled) / 1.8V |
Power Consumption | Active: 89.5mW (MIPI, 30fps) XSHUTDOWN: 0.24 µW |
Temperature | Operating: -30° to 85°C, Storage: -40° to 125°C |
Package | CSP |